Pebble HF minimal RF TX signal while in RX? Yes, but its OK. (read description)

📺 N4EAC📅 21 Nov 2026👁️ 1 views
DIY & BuildingRadios & Transceivers
Advertisement
After completing my first build of the Pebble HF, I ran some basic tests. Using a service monitor, I detected a weak signal being transmitted continuously while the radio was in RX (receive) mode. The RF power detected was extremely low, on the order of 0.0001 watts, but still strong enough to be "heard" by the service monitor. I also tested TX, which performed well, producing approximately 4.98 watts of RF output power. Reception also works, with a somewhat marginal sensitivity of around -108 dBm. This might not be the most sensitive radio, but it is certainly adequate for QRP field operations, especially for a radio costing under USD $50 delivered. The radio works well, and all the components are of good quality. According to Mike, the extremely weak RF signal present during RX is normal for this type of radio. That resolved my concerns about possibly having made soldering mistakes during assembly. Overall, this is a great little radio in its category and price point. I recommend it and look forward to trying it out in the field as soon as possible. 73!

← Back to All Videos