Is your Kenwood TM-D750 running the latest firmware? In this step-by-step tutorial I walk you through the complete Kenwood D750 firmware update process from start to finish, so you can keep your dual band APRS mobile radio current with Kenwood’s latest fixes and improvements.
First, I show you exactly where to download the official Kenwood D750 firmware file from Kenwood’s support site, so you know you’re getting the correct, legitimate update for your radio. Next, I cover how to prepare your micro SD card and where to place the firmware file so the radio can find it. This is the step that trips up a lot of operators, and getting the file location right is the key to a successful update.
Finally, I demonstrate the secret two button power on sequence that puts the Kenwood D750 into firmware update mode. You’ll see exactly which buttons to hold, what the display shows while the update runs, and how to confirm the new firmware version once the radio restarts.
Whether you run your D750 as a mobile rig, a base station, an APRS tracker, or part of your EmComm go kit, keeping the firmware updated helps your radio perform at its best. The whole process takes just a few minutes and needs no computer programming cable. All you need is a micro SD card.
A quick tip before you start: make sure your radio has steady power during the update. Losing power partway through a firmware flash is the one thing you really want to avoid.
#KenwoodD750 #HamRadio #FirmwareUpdate #APRS #AmateurRadio #TMD750 #KM4ACK
🔹My Favorite Gear - https://www.amazon.com/shop/km4ack
🔹Links mentioned in the video
https://www.kenwood.com/i/products/info/amateur/tmd750_update_e.html
🔹Weekly Newsletter - https://mailchi.mp/40da1fe472e3/km4acknewsletter
🔹Follow Me
Twitter @km4ack
🔹Cool Ham Gear - http://km4ack.com
🔹Support the channel through Patreon - https://www.patreon.com/km4ack
🔹🔹🔹🔹🔹
As an Amazon Associate I earn from qualifying purchases